For the manufacture of ECO panels we use a galvanized (60-70 g / m2) rod with a diameter of 3mm (or 3 / 4mm on request) with a cell of 50x200mm. On the vertical of the section there are V-shaped stiffeners, and the upper edge ends with 25 mm pins. The panels are presented at an altitude of 0.93 m, a width of 2.5 m. The system can be equipped with different poles: - round pillar Ø45mm with a wall thickness of 1mm, fastening - crimping clamp "Eco"; - profile pole 60х40мм, from the front side of which there are threaded bushings for fastening "Classic"; Wickets and gates for the IVF system are made of a 40x40mm profile, a grid filling of 4mm, supporting poles with a size of 60x80mm, are equipped with hinges, a latch under the hinged lock and an emphasis (gates). The fencing elements are manufactured in a factory equipped with an automated production line, own laboratory and quality control department. All products are made of galvanized metal and covered with certified polymer of green color RAL 6005 in accordance with European standard 10147. Finished products are supplied to the CIS countries and the European Union. To manufacture the ECO fencing system, less metal and simplified fittings are used, which makes it possible to reduce its cost and make the system more accessible to a wide range of consumers. ZSKfencing section IVFSectional fence
Weight: 3.9 kg
Height: 0.93 m
Specifications
1 м
2,5 m, 3 m (on order)
3/4 мм
sectional fence
welded
3D
50х200
galvanized wire
PPL (polymer)
hot zinc
green (RAL 6005)
2шт
ECO
private houses and cottages
in stock
Fence from a grid height 1.0m ECO Section : Забор из сетки высотой 1.0м Секция ЭКО
Панели сварены из оцинкованного (60-70 г/м2) прута диаметром 3мм или 3/4мм с ячейкой 50х200мм. По вертикали секции расположены V-образные ребра жесткости, а верхний край заканчивается 25мм штырями. Панели представлены в высоте 0,93м, шириной 2,5м. Система может комплектоваться профильными столбами 60х40мм, с фасадной стороны которых имеются резьбовые втулки для крепления "Классик"; Калитки и ворота для системы ЭКО изготовлены из профиля 40х40мм, сеточным наполнением 4мм, опорные столбы размером 60х80мм, комплектуются петлями, задвижкой под навесной замок и упором (ворота). Все элементы изготовлены на заводе Украины, ориентированном на экспорт, покрыты сертифицированным полимером в соответствии с евростандартом 10147. Популярные цвета RAL: Коричневый 8017 Светло серый 7040 Темно серый 7024 Красный синий и другие. ЗСКЭКО КОЛОРСекционный заборсетка с полимерным покрытиемЗСК-БУД ТОВ
Weight: 6.2 kg
Height: 0.82 m
Specifications
1,0м
2,5 m
3/4мм
sectional fence
welded
3D
50х200
galvanized wire
hot zinc
according to RAL, brown (RAL 8017), graphite (RAL 7016), gray (RAL 7040), White, Black, 8, blue (RAL 5005)
For the manufacture of ECO panels we use a galvanized (60-70 g / m2) rod with a diameter of 3mm (or 3 / 4mm on request) with a cell of 50x200mm. On the vertical of the section there are V-shaped stiffeners, and the upper edge ends with 25 mm pins. The panels are presented at an altitude of 0.93 m, a width of 2.5 m. The system can be equipped with different poles: - round pillar Ø45mm with a wall thickness of 1mm, fastening - crimping clamp "Eco"; - profile pole 60х40мм, from the front side of which there are threaded bushings for fastening "Classic"; Wickets and gates for the IVF system are made of a 40x40mm profile, a grid filling of 4mm, supporting poles with a size of 60x80mm, are equipped with hinges, a latch under the hinged lock and an emphasis (gates). The fencing elements are manufactured in a factory equipped with an automated production line, own laboratory and quality control department. All products are made of galvanized metal and covered with certified polymer of green color RAL 6005 in accordance with European standard 10147. Finished products are supplied to the CIS countries and the European Union. To manufacture the ECO fencing system, less metal and simplified fittings are used, which makes it possible to reduce its cost and make the system more accessible to a wide range of consumers. ZSKfencing section IVFSectional fence
PRICE: 1. From the factory, without intermediaries! 2. Discounts for volume % 3. Promotions and sales - here 4. We cooperate: customers / contractors / designers 5. Expanding the dealer network
SHIPPING: 1. Pickup (right and left banks) 2. Kiev - from UAH 500. (14 UAH / km Region) 3. Ukraine "Nova Poshta", "Delivery", "SAT"
Optional color Standard color of products is green (RAL6005). A set is made on order in any color according to the RAL line. Most Popular: gray, brown, graphite, blue, yellow, red, etc ..
Design and install: - Sports grounds - Large turnkey perimeters (from 1 km) - Egoza safety barriers - Country mesh fences - Fencing of public places - Gates and wickets - Gate automation - Street lighting - Video surveillance
The specialists of our company carry out installation of turnkey mesh fences. From the desire to install the fence to the actually installed, the customer is separated by several stages. Stage # 1 Selection of the necessary components: According to technical documentation or actual measurements and landscape features, we draw up a specification of fencing elements . The client receives several possible options for approval. After confirmation, the selected option is taken to work, the terms are determined, and the contract is signed. Stage # 2 Preparatory: Preparation for installation takes place far from the eyes of the client, the company's specialists determine the necessary consumables and their quantity, organize their timely delivery to the object. Also prepare the necessary tools and installation elements. During the construction of regional facilities, they additionally organize everyday life (change houses, warehouses, autonomous food, etc.) Stage # 3 Installation: The installers mark the territory, fix the heights and drill the mounting holes in the ground (the diameter and depth of the hole are regulated by the project). In most cases, the installation of the fence begins with the entrance group (wickets and gates), after which they proceed to the installation of the main fence. Assembly and concreting takes place in one day, after 24 hours you can remove the assembly elements. Stage 4 Completion of the object: Craftsmen remove the formwork, set gaps on the wickets and gates, and then sign an act of delivery of the object with the client.
* price for installation from 50m.p. Minimum volume - 20 lm The cost of installation directly depends on the required amount of consumables and the amount of work. By “scope of work” we mean the amount of fencing to be installed and the specifics of the landscape. The more fencing needs to be installed, the lower the cost per metro station, and vice versa, the more complex the landscape and soil, the more expensive the installation will be. The preliminary cost of installation is calculated to the customer before the specialists get to the object, and is formed exclusively from the words of the client, in 95% of cases the amount of installation does not change, but there are exceptions when the customer does not know that the fence is being erected on a site with construction waste, etc., or in a forest plantation, in this case, the foremen perform soil development and drilling holes manually, which leads to an increase in the cost of the installation. We assert that installing fences is easy, and we do it quickly and efficiently!
